MainPage
About us
Products
News events
Technical Support
Request for Catalogue
Request for Service
Job opportunity استخدام
Contact Us
Exhibitions
Incoming Events
New Products
   Site Statistics
 Online Users : 6
 [totalday] : 57
 [totalweek] : 1130
 [totalmonth] : 6173
 All Visited Pages : 34923
 [totalvisits] : 122908
 Total Users : 28232

The EZ-1 is the economy timer controlled condensate drain, though still incorporating
the highest possible reliability factors.
Whereas the OPTIMUM offers all options as to voltages, pressure and valve body
materials; the EZ-1 is only supplied in 230VAC and 115VAC, up to 16 bar and only in
a brass forged valve body.

Features

• Simple installation procedure
• Direct acting valve with a large valve orifice (4.0 mm) to prevent blockages
• FPM (Viton) valve seals
• Voltage options 115VAC or 230VAC
• Valve connection options 1/4”, 3/8” and 1/2” BSP or NPT
• Standard pressure 0 – 16 bar
• Surface Mounted Technology printed circuit board in timer
• Private labeling possible, consult factory
• Also available with power cable and ball valve strainer
 

 

Timer specification

Interval time                     0.5-45 minutes, adjustable
Discharge time                  0.5-10 seconds, adjustable
Manual TEST switch          Yes, micro switch
Supply voltage options       Up to 230 VAC/DC, +/- 10%, 50/60 Hz
Current consumption         7mA maximum
Operating temperature     -40˚ C to +60˚ C (-40˚ F to 140˚ F)
Environmental protection    IP 65, NEMA 4 when installed
Housing material               ABS plastic FR grade UL94V0
Connection DIN                 43650A ISO 440/6952
Indicators                         1 LED (yellow) indicating ON 
                                       1 LED (yellow) indicating OFF

Valve specification

Type                                 2/2 way direct acting
In/out ports                       1/4”, 3/8” or 1/2” BSP or NPT female
Min./Max. working pressure 0-16 bar g. (0 –230 psi)
Min./Max. temperature       2˚ C-55˚ C ambient (35˚ F-131˚ F)
Valve seal                         FPM (Viton)
Media temperature            Max. 90˚ C (194˚ F)
Valve body                        Forged brass, orifice 4.0 mm
Insulation                          Industry standard grade F.
Environmental protection    IP 65 (NEMA 4)
Voltage options                 115VAC or 230VAC 50/60 Hz. See coil for correct voltage
Voltage tolerance              +/- 10%
Mounting in any position     Yes

Economy line
Copyright © 2006-2010 Noavarhava | Powered by Ravian
Best view at 1024 × 768